[rs-commit] r418 - /mod_cms_sign/trunk/httpd.conf
rs-commit at redwax.eu
rs-commit at redwax.eu
Wed Aug 4 19:50:46 CEST 2021
Author: dirkx at redwax.eu
Date: Wed Aug 4 19:50:46 2021
New Revision: 418
Log:
Remove file that should not have been in the commit.
Removed:
mod_cms_sign/trunk/httpd.conf
Removed: mod_cms_sign/trunk/httpd.conf
==============================================================================
--- mod_cms_sign/trunk/httpd.conf (original)
+++ mod_cms_sign/trunk/httpd.conf (removed)
@@ -1,534 +0,0 @@
-#
-# This is the main Apache HTTP server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
-# In particular, see
-# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
-# for a discussion of each configuration directive.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
-# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
-# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
-# will be interpreted as '/logs/access_log'.
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# Do not add a slash at the end of the directory path. If you point
-# ServerRoot at a non-local disk, be sure to specify a local disk on the
-# Mutex directive, if file-based mutexes are used. If you wish to share the
-# same ServerRoot for multiple httpd daemons, you will need to change at
-# least PidFile.
-#
-ServerRoot "/opt/local"
-
-#
-# Mutex: Allows you to set the mutex mechanism and mutex file directory
-# for individual mutexes, or change the global defaults
-#
-# Uncomment and change the directory if mutexes are file-based and the default
-# mutex file directory is not on a local disk or is not appropriate for some
-# other reason.
-#
-# Mutex default:var/run/apache2
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to
-# prevent Apache from glomming onto all bound IP addresses.
-#
-#Listen 12.34.56.78:80
-Listen 8080
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-LoadModule authn_file_module lib/apache2/modules/mod_authn_file.so
-#LoadModule authn_dbm_module lib/apache2/modules/mod_authn_dbm.so
-#LoadModule authn_anon_module lib/apache2/modules/mod_authn_anon.so
-#LoadModule authn_dbd_module lib/apache2/modules/mod_authn_dbd.so
-#LoadModule authn_socache_module lib/apache2/modules/mod_authn_socache.so
-LoadModule authn_core_module lib/apache2/modules/mod_authn_core.so
-LoadModule authz_host_module lib/apache2/modules/mod_authz_host.so
-LoadModule authz_groupfile_module lib/apache2/modules/mod_authz_groupfile.so
-LoadModule authz_user_module lib/apache2/modules/mod_authz_user.so
-#LoadModule authz_dbm_module lib/apache2/modules/mod_authz_dbm.so
-#LoadModule authz_owner_module lib/apache2/modules/mod_authz_owner.so
-#LoadModule authz_dbd_module lib/apache2/modules/mod_authz_dbd.so
-LoadModule authz_core_module lib/apache2/modules/mod_authz_core.so
-LoadModule access_compat_module lib/apache2/modules/mod_access_compat.so
-LoadModule auth_basic_module lib/apache2/modules/mod_auth_basic.so
-#LoadModule auth_form_module lib/apache2/modules/mod_auth_form.so
-#LoadModule auth_digest_module lib/apache2/modules/mod_auth_digest.so
-#LoadModule allowmethods_module lib/apache2/modules/mod_allowmethods.so
-#LoadModule file_cache_module lib/apache2/modules/mod_file_cache.so
-#LoadModule cache_module lib/apache2/modules/mod_cache.so
-#LoadModule cache_disk_module lib/apache2/modules/mod_cache_disk.so
-#LoadModule cache_socache_module lib/apache2/modules/mod_cache_socache.so
-#LoadModule socache_shmcb_module lib/apache2/modules/mod_socache_shmcb.so
-#LoadModule socache_dbm_module lib/apache2/modules/mod_socache_dbm.so
-#LoadModule socache_memcache_module lib/apache2/modules/mod_socache_memcache.so
-#LoadModule socache_redis_module lib/apache2/modules/mod_socache_redis.so
-#LoadModule watchdog_module lib/apache2/modules/mod_watchdog.so
-#LoadModule macro_module lib/apache2/modules/mod_macro.so
-#LoadModule dbd_module lib/apache2/modules/mod_dbd.so
-#LoadModule dumpio_module lib/apache2/modules/mod_dumpio.so
-#LoadModule echo_module lib/apache2/modules/mod_echo.so
-#LoadModule buffer_module lib/apache2/modules/mod_buffer.so
-#LoadModule data_module lib/apache2/modules/mod_data.so
-#LoadModule ratelimit_module lib/apache2/modules/mod_ratelimit.so
-LoadModule reqtimeout_module lib/apache2/modules/mod_reqtimeout.so
-#LoadModule ext_filter_module lib/apache2/modules/mod_ext_filter.so
-#LoadModule request_module lib/apache2/modules/mod_request.so
-#LoadModule include_module lib/apache2/modules/mod_include.so
-LoadModule filter_module lib/apache2/modules/mod_filter.so
-#LoadModule reflector_module lib/apache2/modules/mod_reflector.so
-#LoadModule substitute_module lib/apache2/modules/mod_substitute.so
-#LoadModule sed_module lib/apache2/modules/mod_sed.so
-#LoadModule charset_lite_module lib/apache2/modules/mod_charset_lite.so
-#LoadModule deflate_module lib/apache2/modules/mod_deflate.so
-LoadModule mime_module lib/apache2/modules/mod_mime.so
-LoadModule log_config_module lib/apache2/modules/mod_log_config.so
-#LoadModule log_debug_module lib/apache2/modules/mod_log_debug.so
-#LoadModule log_forensic_module lib/apache2/modules/mod_log_forensic.so
-#LoadModule logio_module lib/apache2/modules/mod_logio.so
-LoadModule env_module lib/apache2/modules/mod_env.so
-#LoadModule mime_magic_module lib/apache2/modules/mod_mime_magic.so
-#LoadModule expires_module lib/apache2/modules/mod_expires.so
-LoadModule headers_module lib/apache2/modules/mod_headers.so
-#LoadModule usertrack_module lib/apache2/modules/mod_usertrack.so
-#LoadModule unique_id_module lib/apache2/modules/mod_unique_id.so
-LoadModule setenvif_module lib/apache2/modules/mod_setenvif.so
-LoadModule version_module lib/apache2/modules/mod_version.so
-#LoadModule remoteip_module lib/apache2/modules/mod_remoteip.so
-#LoadModule proxy_module lib/apache2/modules/mod_proxy.so
-#LoadModule proxy_connect_module lib/apache2/modules/mod_proxy_connect.so
-#LoadModule proxy_ftp_module lib/apache2/modules/mod_proxy_ftp.so
-#LoadModule proxy_http_module lib/apache2/modules/mod_proxy_http.so
-#LoadModule proxy_fcgi_module lib/apache2/modules/mod_proxy_fcgi.so
-#LoadModule proxy_scgi_module lib/apache2/modules/mod_proxy_scgi.so
-#LoadModule proxy_uwsgi_module lib/apache2/modules/mod_proxy_uwsgi.so
-#LoadModule proxy_fdpass_module lib/apache2/modules/mod_proxy_fdpass.so
-#LoadModule proxy_wstunnel_module lib/apache2/modules/mod_proxy_wstunnel.so
-#LoadModule proxy_ajp_module lib/apache2/modules/mod_proxy_ajp.so
-#LoadModule proxy_balancer_module lib/apache2/modules/mod_proxy_balancer.so
-#LoadModule proxy_express_module lib/apache2/modules/mod_proxy_express.so
-#LoadModule proxy_hcheck_module lib/apache2/modules/mod_proxy_hcheck.so
-#LoadModule session_module lib/apache2/modules/mod_session.so
-#LoadModule session_cookie_module lib/apache2/modules/mod_session_cookie.so
-#LoadModule session_dbd_module lib/apache2/modules/mod_session_dbd.so
-LoadModule slotmem_shm_module lib/apache2/modules/mod_slotmem_shm.so
-#LoadModule slotmem_plain_module lib/apache2/modules/mod_slotmem_plain.so
-#LoadModule ssl_module lib/apache2/modules/mod_ssl.so
-#LoadModule dialup_module lib/apache2/modules/mod_dialup.so
-#LoadModule lbmethod_byrequests_module lib/apache2/modules/mod_lbmethod_byrequests.so
-#LoadModule lbmethod_bytraffic_module lib/apache2/modules/mod_lbmethod_bytraffic.so
-#LoadModule lbmethod_bybusyness_module lib/apache2/modules/mod_lbmethod_bybusyness.so
-#LoadModule lbmethod_heartbeat_module lib/apache2/modules/mod_lbmethod_heartbeat.so
-LoadModule unixd_module lib/apache2/modules/mod_unixd.so
-#LoadModule heartbeat_module lib/apache2/modules/mod_heartbeat.so
-#LoadModule heartmonitor_module lib/apache2/modules/mod_heartmonitor.so
-#LoadModule dav_module lib/apache2/modules/mod_dav.so
-LoadModule status_module lib/apache2/modules/mod_status.so
-LoadModule autoindex_module lib/apache2/modules/mod_autoindex.so
-#LoadModule asis_module lib/apache2/modules/mod_asis.so
-#LoadModule info_module lib/apache2/modules/mod_info.so
-#LoadModule cgi_module lib/apache2/modules/mod_cgi.so
-#LoadModule dav_fs_module lib/apache2/modules/mod_dav_fs.so
-#LoadModule dav_lock_module lib/apache2/modules/mod_dav_lock.so
-#LoadModule vhost_alias_module lib/apache2/modules/mod_vhost_alias.so
-#LoadModule negotiation_module lib/apache2/modules/mod_negotiation.so
-LoadModule dir_module lib/apache2/modules/mod_dir.so
-#LoadModule actions_module lib/apache2/modules/mod_actions.so
-#LoadModule speling_module lib/apache2/modules/mod_speling.so
-#LoadModule userdir_module lib/apache2/modules/mod_userdir.so
-LoadModule alias_module lib/apache2/modules/mod_alias.so
-#LoadModule rewrite_module lib/apache2/modules/mod_rewrite.so
-
-<IfModule unixd_module>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# It is usually good practice to create a dedicated user and group for
-# running httpd, as with most system services.
-#
-User _www
-Group _www
-
-</IfModule>
-
-# 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents. e.g. admin at your-domain.com
-#
-ServerAdmin you at example.com
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-#
-#ServerName www.example.com:80
-
-#
-# Deny access to the entirety of your server's filesystem. You must
-# explicitly permit access to web content directories in other
-# <Directory> blocks below.
-#
-<Directory />
- AllowOverride none
- Require all denied
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/opt/local/www/apache2/html"
-<Directory "/opt/local/www/apache2/html">
- #
- # Possible values for the Options directive are "None", "All",
- # or any combination of:
- # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
- #
- # Note that "MultiViews" must be named *explicitly* --- "Options All"
- # doesn't give it to you.
- #
- # The Options directive is both complicated and important. Please see
- # http://httpd.apache.org/docs/2.4/mod/core.html#options
- # for more information.
- #
- Options Indexes FollowSymLinks
-
- #
- # AllowOverride controls what directives may be placed in .htaccess files.
- # It can be "All", "None", or any combination of the keywords:
- # AllowOverride FileInfo AuthConfig Limit
- #
- AllowOverride None
-
- #
- # Controls who can get stuff from this server.
- #
- Require all granted
-</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-<IfModule dir_module>
- DirectoryIndex index.html
-</IfModule>
-
-#
-# The following lines prevent .htaccess, .htpasswd and .DS_Store files and
-# Mac resource forks and named forks from being viewed by Web clients.
-#
-<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
- Require all denied
-</Files>
-<Files "rsrc">
- Require all denied
-</Files>
-<DirectoryMatch ".*\.\.namedfork">
- Require all denied
-</DirectoryMatch>
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog "/tmp/error_log"
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel debug
-
-<IfModule log_config_module>
- #
- # The following directives define some format nicknames for use with
- # a CustomLog directive (see below).
- #
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
- LogFormat "%h %l %u %t \"%r\" %>s %b" common
-
- <IfModule logio_module>
- # You need to enable mod_logio.c to use %I and %O
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
- </IfModule>
-
- #
- # The location and format of the access logfile (Common Logfile Format).
- # If you do not define any access logfiles within a <VirtualHost>
- # container, they will be logged here. Contrariwise, if you *do*
- # define per-<VirtualHost> access logfiles, transactions will be
- # logged therein and *not* in this file.
- #
- CustomLog "/tmp/access_log" common
-
- #
- # If you prefer a logfile with access, agent, and referer information
- # (Combined Logfile Format) you can use the following directive.
- #
- #CustomLog "/tmp/access_log" combined
-</IfModule>
-
-<IfModule alias_module>
- #
- # Redirect: Allows you to tell clients about documents that used to
- # exist in your server's namespace, but do not anymore. The client
- # will make a new request for the document at its new location.
- # Example:
- # Redirect permanent /foo http://www.example.com/bar
-
- #
- # Alias: Maps web paths into filesystem paths and is used to
- # access content that does not live under the DocumentRoot.
- # Example:
- # Alias /webpath /full/filesystem/path
- #
- # If you include a trailing / on /webpath then the server will
- # require it to be present in the URL. You will also likely
- # need to provide a <Directory> section to allow access to
- # the filesystem path.
-
- #
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the target directory are treated as applications and
- # run by the server when requested rather than as documents sent to the
- # client. The same rules about trailing "/" apply to ScriptAlias
- # directives as to Alias.
- #
- ScriptAlias /cgi-bin/ "/opt/local/www/apache2/cgi-bin/"
-
-</IfModule>
-
-<IfModule cgid_module>
- #
- # ScriptSock: On threaded servers, designate the path to the UNIX
- # socket used to communicate with the CGI daemon of mod_cgid.
- #
- #Scriptsock cgisock
-</IfModule>
-
-#
-# "/opt/local/www/apache2/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/opt/local/www/apache2/cgi-bin">
- AllowOverride None
- Options None
- Require all granted
-</Directory>
-
-<IfModule headers_module>
- #
- # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
- # backend servers which have lingering "httpoxy" defects.
- # 'Proxy' request header is undefined by the IETF, not listed by IANA
- #
- RequestHeader unset Proxy early
-</IfModule>
-
-<IfModule mime_module>
- #
- # TypesConfig points to the file containing the list of mappings from
- # filename extension to MIME-type.
- #
- TypesConfig etc/apache2/mime.types
-
- #
- # AddType allows you to add to or override the MIME configuration
- # file specified in TypesConfig for specific file types.
- #
- #AddType application/x-gzip .tgz
- #
- # AddEncoding allows you to have certain browsers uncompress
- # information on the fly. Note: Not all browsers support this.
- #
- #AddEncoding x-compress .Z
- #AddEncoding x-gzip .gz .tgz
- #
- # If the AddEncoding directives above are commented-out, then you
- # probably should define those extensions to indicate media types:
- #
- AddType application/x-compress .Z
- AddType application/x-gzip .gz .tgz
-
- #
- # AddHandler allows you to map certain file extensions to "handlers":
- # actions unrelated to filetype. These can be either built into the server
- # or added with the Action directive (see below)
- #
- # To use CGI scripts outside of ScriptAliased directories:
- # (You will also need to add "ExecCGI" to the "Options" directive.)
- #
- #AddHandler cgi-script .cgi
-
- # For type maps (negotiated resources):
- #AddHandler type-map var
-
- #
- # Filters allow you to process content before it is sent to the client.
- #
- # To parse .shtml files for server-side includes (SSI):
- # (You will also need to add "Includes" to the "Options" directive.)
- #
- #AddType text/html .shtml
- #AddOutputFilter INCLUDES .shtml
-</IfModule>
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-#MIMEMagicFile etc/apache2/magic
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# MaxRanges: Maximum number of Ranges in a request before
-# returning the entire resource, or one of the special
-# values 'default', 'none' or 'unlimited'.
-# Default setting is to accept 200 Ranges.
-#MaxRanges unlimited
-
-#
-# EnableMMAP and EnableSendfile: On systems that support it,
-# memory-mapping or the sendfile syscall may be used to deliver
-# files. This usually improves server performance, but must
-# be turned off when serving from networked-mounted
-# filesystems or if support for these functions is otherwise
-# broken on your system.
-# Defaults: EnableMMAP On, EnableSendfile Off
-#
-#EnableMMAP off
-#EnableSendfile on
-
-# Supplemental configuration
-#
-# The configuration files in the etc/apache2/extra/ directory can be
-# included to add extra features or to modify the default configuration of
-# the server, or you may simply copy their contents here and change as
-# necessary.
-
-# Server-pool management (MPM specific)
-#Include etc/apache2/extra/httpd-mpm.conf
-
-# Multi-language error messages
-#Include etc/apache2/extra/httpd-multilang-errordoc.conf
-
-# Fancy directory listings
-#Include etc/apache2/extra/httpd-autoindex.conf
-
-# Language settings
-#Include etc/apache2/extra/httpd-languages.conf
-
-# User home directories
-#Include etc/apache2/extra/httpd-userdir.conf
-
-# Real-time info on requests and configuration
-#Include etc/apache2/extra/httpd-info.conf
-
-# Virtual hosts
-#Include etc/apache2/extra/httpd-vhosts.conf
-
-# Local access to the Apache HTTP Server Manual
-#Include etc/apache2/extra/httpd-manual.conf
-
-# Distributed authoring and versioning (WebDAV)
-#Include etc/apache2/extra/httpd-dav.conf
-
-# Various default settings
-#Include etc/apache2/extra/httpd-default.conf
-
-# Configure mod_proxy_html to understand HTML4/XHTML1
-<IfModule proxy_html_module>
-Include etc/apache2/extra/proxy-html.conf
-</IfModule>
-
-# Secure (SSL/TLS) connections
-#Include etc/apache2/extra/httpd-ssl.conf
-#
-# Note: The following must must be present to support
-# starting without SSL on platforms with no /dev/random equivalent
-# but a statically compiled-in mod_ssl.
-#
-<IfModule ssl_module>
-SSLRandomSeed startup builtin
-SSLRandomSeed connect builtin
-</IfModule>
-
-PidFile /tmp/apache.pid
-
-LoadModule cms_sign_module /Users/dirkx/tmp/redwax/mod_cms_sign/.libs/mod_cms_sign.so
-
-LogLevel Debug
-
-SetOutputFilter cmssign
-CMSSigningCertificate /tmp/sign.cert
-CMSSigningKey /tmp/sign.key
-CMSAddCerts /tmp/chain.pem
More information about the rs-commit
mailing list